Back to FAQ | KOLGRILLAR
A common misconception is that the temperature gauge in the lid of your grill is reading the cooking temperature. This is not true. Lid mounted temperature gauges measure the air temperature at the location of the gauge. The grate temperature can be much higher than the lid temperature due to ambient conditions and calibration of the gauge. If you are questioning the cooking temperature based on the reading from your lid mounted temperature gauge please take a reading at the cooking grate surface. This will allow you to see the actual cooking temperature.
Related Support
CHARCOAL TEMPERATURE WON'T REGULATE
<div class="article-copy">You can regulate the temperature by adjusting the grill dampers.
If you’re not able to achieve the temperature you need, check for any gaps in the damper. If the damper is bent or warped, it will not create an efficient seal, and you’ll need to buy a new grill damper. Each charcoal grill has a unique configuration, so make sure to check your manual.
<ul>
<li><strong>Intake Damper</strong> The intake damper is the main temperature control in the grill and brings oxygen to the fire. The intake damper will be on the grill firebox or the offset smoker fire box. When starting up the grill, leave the damper open so oxygen can get to the flame and feed the fire--if you close the damper, oxygen can’t get to the fire and it’ll die off. For hotter temperatures, keep the damper open. Partially close the damper to starve the fire of oxygen and cool off the grill--open the vent back if you notice the temperature drops too low.</li>
</ul>
<ul>
<li><strong>Exhaust Damper</strong> The exhaust damper will be on the smokestack of barrel-style charcoal grills or on the lid of non-barrel charcoal grills. The exhaust grill damper allows heat and smoke to escape the firebox. By opening the vent, you release the excess smoke and create low pressure inside the grill. The low pressure pulls oxygen into the intake vent on the side of the firebox.</li>
</ul></div>
HOW TO USE CHARCOAL ON THE KETTLEMAN™
<div class="article-copy">From top to bottom, the <a href="https://www.charbroil.com/kettleman-charcoal-grill">Kettleman™</a> has been designed to give you a better cooking experience. And how you use charcoal is an important part. Thanks to the innovative design, the Kettleman™ requires less charcoal than a standard charcoal grill.
<strong>Direct Grilling</strong>
For standard direct cooking, distribute about 50 briquettes evenly. Don’t worry about the gaps. Just be sure to let the cooking grate pre-heat for 5 to 10 minutes to get that perfect sear on steaks, chops, burgers or anything else you want to sizzle. You can also cook directly by leaving the coals mounded in the middle and positioning your food above the coals. To make lighting the charcoal easy, use a chimney starter, or you can mound the briquettes into a pyramid-shaped pile. Lighter fluid, fire starters or crumpled paper will all help start the burn. When the coals are mostly covered in light grey ash it’s time to get cooking.
<strong>Indirekt Grilling</strong>
The <a href="https://www.charbroil.com/kettleman-charcoal-grill">Char-Broil Kettleman™</a> offers you a variety of ways to control the heat for a low and slow burn. The Kettleman™’s fire grate is higher and 20% wider, you can cook a variety of food by surrounding it with a consistent low heat. For standard indirect cooking, pre-heat about 60 briquettes to cover half the fire grate. Then place your food on the other half of the grill. You can also arrange about 60 briquettes in a ring around the outside edge. Pre-heat the coal, and then place your food in the middle of the grate. To get a real low and slow burn, the Kettleman™ has you covered. Arrange about 80 briquettes in a c-shape around the fire grate. Light one end to allow the charcoal to burn like a fuse providing you more than 6 hours of cooking time. After the first few coals turn white, place the cooking grate on the charcoal. You can even use a pile of charcoal in the middle of the fire grate to achieve indirect heating, as long as you place your food around the outer edge. If you need longer cook time, add a few extra briquettes before placing the cooking grate on.</div>
WIE PLATZIERE ICH DIE KOHLE IM OKLAHOMA JOE'S HIGHLAND SMOKER?
Okloahoma Joe‘s Highland Smoker kannst Du mit Holzkohlebrikket oder Holzkohle betreiben. Platziere die Holzkohle einfach auf dem Feuerrost (s. Abbildung), so dass sie von allen Seiten Luft bekommt und optimal durchglühen kann. Achte darauf, die Kohle nicht direkt an der Außenhaut oder den Boden des Smokers zu platzieren, um möglichen Abnutzungserscheinungen entgegenzuwirken. Nutze zudem nur so viel Grillkohle wie unbedingt nötig (max. 1,5 kg), damit schonst Du Ressourcen und trägst dazu bei, dass Dein Oklahoma bestmöglich funktioniert und eine lange Lebensdauer hat.
